XR650 System User Guide
XR650 System User Guide
Breadcrumbs

Arm Your System

Thinline and Wireless Touchscreen Keypads

  1. Press CMD until ARM DISARM displays.

  2. Select ARM. The keypad displays ALL? NO YES.

  3. To arm all areas, select YES. To arm select areas, select NO. The keypad displays each area you have access to. Select YES to arm the areas and NO to leave the area disarmed.

Touchscreen Keypads

  1. Press and release the shield to open the arming options screen.

  2. Select ARM. The keypad displays a list of areas to arm.

  3. To arm all areas, select Arm All at the right of the screen. To arm select areas, tap the area name and then select Arm Selected at the right of the screen.

Other Arming Options

Instantly Arm Your System

  1. Press and release the shield on a 5-Inch or 7-Inch Touchscreen Keypad to open the arming options screen or press CMD on a Thinline keypad until ARM DISARM displays.

  2. Select INSTANT. This overrides the entry and exit delay, instantly arming your system.

Use the Keypad Shortcut Keys

The keypads provide one-button shortcut keys. Press the key for two seconds until a tone sounds.

KEY

OPERATION

1

Arm Away for Home/Sleep/Away Systems

Arm Away for Home/Sleep/Away with Guest systems

Arm All for All/Perimeter systems

2

Fire and Panic Sensor Reset on all systems

3

Arm Home for Home/Sleep/Away systems

Arm Home for Home/Sleep/Away with Guest systems

5

Monitor (Chime) on all systems

6

Arm Perimeter for All/Perimeter systems

7

Arm Sleep for Home/Sleep/Away systems

Arm Sleep for Home/Sleep/Away with Guest systems

8

Easy Exit for Home/Sleep/Away systems

Bypass Zones

If a problem exists on any zone, the zone name and problem display, followed by OK BYPASS STOP.

  • Press OK to force arm the zone. The zone will re-arm when it’s restored.

  • Press BYPASS to ignore the zone before arming. Panic, emergency, fire, flood detector, and temperature sensor zones cannot be bypassed.

  • Press STOP to stop your system from arming. This allows you to correct the zone, return to the keypad, and restart the arming process.

Extend Schedules

When a schedule is active, you can extend the schedule to a later time. When arming your system, the keypad displays LATE or CLOSING TIME!.

  1. Press any select key or area. The keypad displays ENTER CODE:-.

  2. Enter your user code and press CMD or present your credential to a card reader.

  3. The keypad displays 2HR 4HR 6HR 8HR. Select the number of hours to extend the schedule.

Extend Closing Time

When a schedule is active, you can extend the Closing Time.

  1. Press CMD until MENU? NO YES displays.

  2. Select YES.

  3. Enter your user code and press CMD.

  4. Press CMD until EXTEND CLOSING? displays. Press any select key or area.

  5. If area schedules is enabled, select the area you want to extend.

  6. At ENTER CLOSE TIME, enter in the new closing time.

  7. Select CMD. CLOSING EXTENDED appears to indicate that the new closing time has been saved.